markagrip Extra Coarse Anti Slip Tape
- Ex Tax: £16.23
If you need a strong anti-slip tape that is able to withstand significant and prolonged use, our markagrip extra coarse anti-slip tape would be recommended. It is the world’s strongest and coarsest anti-slip tape that you can find on the market and it is ideal for use in areas that face continuous exposure to the harshest conditions such as snow and ice.
The anti-slip tape is manufactured from the largest grade of aluminium oxide granules and an extra thick plastic carrier with high tack adhesive, this product is designed for demanding environments or difficult surfaces and it will remain in place for as long as you need it to. Perhaps you need to mark the edge of a set of steps and add anti slip in your plant or mark out different areas in a warehouse facility, this product will work well in any of these situations and so many others. The extra coarse product is specifically designed for industrial and heavy duty applications.
With the deep grit surface, it resists being blocked by ice or dirt and will still offer the highest levels of anti-slip that you need for optimum levels of safety. The large grit particles will allow any water or substance to drain free from the surface. To achieve maximum effectiveness of this product and the strongest bond from the adhesive, it is recommended that you use it with the marka IPA cleaner as well as the primer and EdgeFix to prolong the life of your tape. These products are essential for use on porous surfaces too. The tape and any equipment should be stored in a warm, dry place and in the original packaging until you are ready to use it.
Sizes: Stock sizes of 25mm, 50mm, 100mm, and 150mm width rolls which are all 18.3 meters in length.
However, markagrip can be supplied in any width from 19mm up to 1168mm (widths of between 10mm to 18mm available on special request) in 18.3 meter rolls or 100 meter on request. If you are interested in a non-stock size or shape simply get in contact with us for a quote via our online forms, or over the phone. Please be aware a minimum order quantity may apply.
Custom Anti Slip Tape: Aside from our off the shelf products, dependent on order quantity, we can supply markagrip Coarse in a wide range of sizes, shapes and colours (matching Pantone or RAL reference).
For more information on markagrip or for a quote or sample, fill out the request a quote/sample or contact us from and we will get back to you as soon as we can.
The first step in the installation process is to ensure that you have a clean, dry surface to work with that is free from debris and contaminants. Where the surface has paint flakes or other contaminants it is recommended that you use an IPA cleaner to remove them, but do not use any form of methylated spirit, petrol or lighter fluid for this task because it will leave a greasy residue which will affect how well the adhesive works. Also make sure that the surface is above 10°C.
Sealing of Porous Surfaces
Where the tape is to be applied to a porous surface, it will need to be sealed before installation. This will stop any water from attacking the adhesive. A Toluene based primer is suitable for this task. Take the primer and apply a thin coat to the cleaned surface using a paint brush and leave to dry.
When the primer is dry, remove the release liner from the tape and press the adhesive firmly onto the surface, slowly peeling back the liner as you apply the tape to the required area. Make sure that the tape isn’t pulled too tight.
When you have applied the tape to the surface, press it down ensuring that all of the tape is fixed to the surface. A roller is great for this. The final task is to use the Edge Fix product to seal the edges of the tape to prolong its lifespan. As soon as you have sealed the tape and the edge fix is dry it is ready to walk on and the adhesive will be fully set in around 48 hours.