markagrip Aqua Non Abrasive Anti Slip Tape
- Ex Tax: £14.04
There are many commercial and industrial environments that require the use of a strong and long lasting anti-slip tape. Perhaps you need it to mark out different work areas in a factory or designate a certain place in a warehouse, whatever you need, our markagrip Aqua non-abrasive anti-slip tape is the ideal solution. The product can be used in areas where the traditional abrasive tape is unsuitable. It is an abrasive-free and waterproof, anti-slip tape which is an excellent alternative to the traditional abrasive tapes that you can find on the market. It doesn’t shed any grit, it is easy to clean and kind on the skin and fabrics. It is also compatible with a variety of cleaning machines.
The surface of the tape will not retain dirt or bacteria and it’s very easy to clean too. It’s ideal for use in kitchen areas, sterile manufacturing locations, swimming pools and food preparation areas. This product is suitable for use in any area that is in constant contact with water and anywhere there is standing water. It is recommended that you use this product in combination with our primer, edge fix and cleaner to deliver the best results, particularly when working with porous surfaces. If you are not ready to use the material immediately, keep it in the original packaging and store it in a place that’s warm and dry to retain optimum condition.
Sizes: Stock sizes of 25mm, 50mm, 100mm, and 150mm width rolls which are all 18.3 meters in length.
Colours: Black, Beige, Transparent, Grey, White
However, markagrip can be supplied in any width from 19mm up to 1168mm (widths of between 10mm to 18mm available on special request) in 18.3 meter rolls or 100 meter on request. If you are interested in a non-stock size or shape simply get in contact with us for a quote via our online forms, or over the phone. Please be aware a minimum order quantity may apply.
Custom Anti Slip Tape: Aside from our off the shelf products, dependent on order quantity, we can supply markagrip Coarse in a wide range of sizes, shapes and colours (matching Pantone or RAL reference).
For more information on markagrip or for a quote or sample, fill out the request a quote/sample or contact us from and we will get back to you as soon as we can.
Before installing the tape, the surface should be clean and most importantly dry. Even though the tape can withstand constant exposure to water, it will need to be dry during the installation process. Make sure that the surface is also free from other debris and contaminants which could affect how well the adhesive works. You can use our IPA cleaner but avoid any type of lighter fluid, petrol or methylated spirits because this will affect the adhesive due to the greasy layer that they leave behind. The surface temperature should also be higher than 10°C.
Sealing of Porous Surfaces
If you are applying the tape to a porous surface, you will need to ensure that the surface is properly sealed before you install the tape. If you don’t seal it properly, water can attack the adhesive and prevent it from working properly. The best product to use for this task is to use a Toluene primer, applying a very thin coat to the surface using a paintbrush. Leave to dry before installing the tape.
Take the length of tape that you would like to install and press the adhesive firmly onto the required surface, as you do so peel back the liner to ensure that the tape is secured in place. Ensure that the tape isn’t too taut. Once applied, smooth the tape down ensuring that the entire surface area is properly flattened down, so it fixes itself to the surface. A decorating roller would work well for this. The final step in the process is to use the Edge Fix product to seal the edges of the tape. This will prolong its lifespan.