Call Us Today: 01934 864360

markagrip Glow Anti Slip Tape

  • £38.20

  • Ex Tax: £31.83

Available Options

  • markagrip Glow Anti Slip Tape

Tags: markagrip, Anti Slip, Tape, Non Slip, Non-slip, Anti-slip, Glow, Photoluminescent

markagrip Glow anti-slip tape is a glow in the dark product, making it great for increasing safety and providing an anti-slip step edge marker in a lights out scenario. Featuring a self adhesive plastic base the tape has been coated in anti-slip grit, which is bound onto the backing of the tape with a strong resin including a glow in the dark paste which ensures maximum visibility when natural light is reduced It will create a bright glow.It will display as a light green shade in daylight and in darkness it will produce a bright white glow.

The particles are charged through either natural or artificial light sources and will take a few hours to charge depending on how strong the light source is. The product doesn’t contain any radioactive or harmful chemicals and it is suitable for a variety of applications and critical areas where it is important that exits and walkways are properly illuminated in darkness.

Enhance safety levels, reduce slips and improve visibility with this anti-slip, glow in the dark tape. The depth of the gritted surface also reduces dust and dirt from becoming trapped inside, making it perfect for industrial applications.

Sizes:  Our Standard stock sizes available online are 25mm, 50mm, 100mm, and 150mm width rolls which are all 18.3 meters in length

Colours: Glow in the Dark, Glow in the Dark Hazard, Glow Line ( Black with glow strip down the center) 

However, markagrip can be supplied in any width from 19mm up to 1168mm (widths of between 10mm to 18mm available on special request) in 18.3 meter rolls or 100 meter on request. If you are interested in a non-stock size or shape simply get in contact with us for a quote via our online forms, or over the phone. Please be aware a minimum order quantity may apply. 

Custom Anti Slip Tape: Aside from our off the shelf products, dependent on order quantity, we can supply markagrip Standard in a wide range of sizes, shapes and colours (matching Pantone or RAL reference).

For more information on markagrip or for a quote or sample, fill out the request a quote/sample or contact us from and we will get back to you as soon as we can. 

A well prepared surface is important to ensure that the product works effectively. To start with, the surface should be dry and clean. If there is any dust, debris or shavings, these should be carefully swept away from the area. It is recommended that you use a good quality IPA cleaner to remove all surface contaminants such as paint flakes. Never use petrol, lighter fluid or methylated spirits for this task because these will leave behind a thin, greasy residue. The prepared surface should also be above 10°C.

Sealing of Porous Surfaces

When working with a porous surface, it should be suitably sealed before application. This will prevent water from attacking the adhesive. A toluene based primer would work well. Our own products are highly recommended for this task. With your chosen primer, apply a very thin coat to the surface using a suitable paintbrush and then leave to dry.

Tape Application

When the primer is dry, take the length of anti-slip tape and peel back part of the release liner. Press the adhesive firmly onto the prepared service, slowly peeling back the liner as you apply the tape along the length of flooring, stair or surface you are working with. Ensure that the tape is not too taut.

When the tape is applied to the surface, press it down firmly using even pressure. A decorating roller would be perfect for this task. The edges should then be sealed using an ‘edge fix’ product or something similar to maximise the lifespan of the tape. You only need to apply a small amount of edge fix to either side of the tape. A tiny bead along the length of the tape is best, allow edge fix to dry.

Once the tape has been installed using the recommended installation methods, it can be used and walked on as part of everyday operations and the adhesive will be fully set within 48 hours.

Related Products

Get The Latest News And Special Offers