The Reflective Marking Tape can be used to mark out areas that are potentially hazardous and dangerous. This minimises the risk of injury, improves health and safety in the workplace and ensures your business stays compliant with legal requirements. Manufactured for convenience, this easy-to-apply tape can be fitted in minutes with a self-adhesive backing that affixes easily to hard and clean surfaces. It has a highly reflective surface which works with the available light in your building to ensure exceptional visibility. This ensures that even if operating a machine or working in darker conditions.
This tape can be used for a range of applications. These range from marking stairways for safe escape during an emergency, highlighting ledges to reduce the risk of falling or creating a dedicated route to follow during an evacuation. We now supply this reflective tape in rolls to accommodate for larger areas. They are available in 25mm or 50mm widths and up to 10m in length. In addition, we are able to supply rolls to fit your requirements in width and length upon request. They are available in a range of colours to suit your corporate needs or allow you to define specific purposes of space in your property. And, finally, it can be printed on to, allowing for additional branding opportunities. Please allow an extended lead time to accommodate for this.
If you have any questions and queries about the Reflective Marking Tape, get in touch with the team here today.
1) Material Storage
Ensure the material is kept in dry, warm conditions in the original protective packaging.
2) Surface Preparation
A clean, dry surface is essential. Use an IPA cleaner to remove all surface contaminants (paint flakes, etc) – DO NOT use methylated spirits/petrol/lighter fluid etc., as these leave behind a thin, greasy residue. Ensure prepared surface is above 10°C.
3) Porous Surface Sealing
Porous surfaces must be sealed prior to application to prevent water attacking the adhesive. Toluene based primers are ideal - we recommend our own product for this job. Apply a thin coat to the cleaned surface using a paint brush, then leave to dry.
4) Tape Application
Peel back part of the release liner then press the adhesive firmly onto the prepared surface, and slowly keep peeling back the liner while applying the tape. Try to ensure that the tape is not taut.
Once applied, press tape down firmly using even pressure (decorating rollers are excellent for this). We recommend sealing the edges using ‘edge fix’ as this will extend the life of the product. Only use a small amount down the edges, a thin bead.
If correctly applied, the new anti-slip surface can be walked on instantly, you will get maximum benefit from the adhesive system after 48 hours.
Sizes: Our Standard stock sizes available online are 25mm and 50mm width rolls which are all 10 meters in length.
Colours: Yellow, Green, Orange, Red, Silver (White), Yellow, Blue, Red/White Hazard, Black/Yellow Hazard.
However, supply in any width from 15mm up to 1220mm in 10 meter rolls is possible, If you are interested in a non-stock size or shape simply get in contact with us for a quote via our online forms, or over the phone. Please be aware a minimum order quantity may apply.
For more information on markagrip or for a quote or sample, fill out the request a quote/sample or contact us from and we will get back to you as soon as we can.